MacGregor MT Milled Putters

The brand new line of MacGregor MT Milled Putters is the newest entry in a putter class that’s straightforward to miss, mainly as a result of it’s so small: Excessive-quality 100-percent milled putters for lower than $200.

You’ve got Cleveland’s HB SOFT Milled line beginning at $199.99 which, technically, is below $200. Costco’s Anser-style Kirkland Signature KS-1 is $149.99 (when you will discover it) and there’s possibly a handful of others.

That’s about it. And the actual fact is that the majority of them are literally forged right into a tough putter form after which CNC milled into their remaining form. Once you begin whittling the checklist all the way down to putters which are 100-percent milled from a single billet of carbon metal for below $200, the checklist will get even shorter.

There’s Maltby, Hogan and MacGregor. I do know you’ll tell us if we’re lacking any however the level stays that it’s a extremely quick checklist.

The query as as to if a putter that’s 100-percent milled from a single piece of carbon is any higher than one which’s forged after which milled is unanswerable. Extra exactly, it’s one which we will’t reply. Solely you’ll be able to, based mostly on what performs higher for you. However on the grand scorecard of whether or not a putter needs to be $400 to get the ball within the damned gap, the brand new MacGregor MT Milled line goes on the “Hell no, it doesn’t” facet of the ledger.

Let’s have a look.

MacGregor MT Milled Putters: Milled Worth

Based mostly on this 12 months’s MyGolfspy Most Wished blade and mallet putter testing, the brand new MacGregor MT Milled putters gained’t overwhelm you. The middle-shafted MT-002 completed subsequent to final in mallet testing, whereas the Anser-style MT-004 was 37^th out of 39 putters in blade testing. The MacGregor MT-001, a double-wide Anser-style blade, did end 20^th total, beating out higher-priced heavyweights from Odyssey, Bettinardi, Scotty Cameron and PING.

As we’ve mentioned, putters are private issues and our Most Wished testing is a superb start line when on the lookout for one. Demo classes are nice for figuring out what lengths, lies, head shapes and weighting may go well with you. And, after all, there’s no substitute for putter becoming.

Why, then, would you even think about a direct-to-consumer putter that was a meh performer that you may’t demo?

The reply comes down to 2 easy questions it is best to ask your self.

First: Have you learnt the size, head form and alignment choices that go well with you?

Second: For those who do know these issues, does a single-block, 100-percent milled carbon metal putter for $159.99 make you need to perform a little dance, make a little bit love and get down tonight?

“They’re stunning putters,” says MacGregor proprietor Simon Millington. “They’ve acquired quite a bit going for them and it’s an unbelievable value.”

The MT Milled Blades

The MacGregor MT Milled 001 and 004 putters are Anser-style blades with one vital distinction: the MacGregor MT 001 is what you may name a “double-wide.” It’s wide-bodied so, relying in your desire, you’ll be able to name it a maxi-blade or a mini-mallet. We examined it within the blade class however, finally, you’ll be able to name it what you need.

Vast-bodied blades such because the MT 001 are likely to have increased MOI than what we’ve come to name blade-style putters (in case you’re a purist, something outdoors of a Bulls Eye or an 8802/Napa stall isn’t a “true” blade). And the wide-bodies have mid-mallet degree stability. The MT 001 (together with the remainder of the road) options 10-gram weights within the heel and toe to offer additional perimeter weighting to stop twisting on the occasional (or possibly greater than occasional) off-center strike.

The MacGregor MT 004 is a standard Anser-style, plumber’s neck blade. The Anser-style design dates again to 1966 due to Karsten Solheim and the unique PING Anser. It’s milled with a cavity within the center with additional mass low and on the perimeter. Karsten’s authentic thought was to create a extra steady and forgiving putter than the preferred putter of the day, the Wilson 8802. PING let its design patent expire in 1980 and the Anser has since grow to be essentially the most emulated putter design in golf historical past.

Like its stablemate, the MacGregor MT 004 consists of 10-gram weights within the heel and toe for larger stability. However with its smaller profile it, by nature, has a decrease MOI. Each putters function a single centered alignment line within the cavity to complete off a clear, easy look.

The MT Milled Mallets

The brand new MacGregor MT Milled mallets are the place issues begin to get fascinating. There’s a placing sub-culture devoted to the preservation of center-shafted putters. For those who’re a member of that secret society, MacGregor milled the MT 002 only for you. It’s a center-shafted mallet in a form MacGregor calls “Wing Again.” It’s a rounded, abbreviated fang-tooth affair that’s face-balanced for golfers with a straight-back/straight-through stroke.

The MacGregor MT 003 contains a comparable footprint because the 002 however it’s a completely rounded mallet. The extra mass within the again helps enhance MOI. The MT 003 is heel-shafted however remains to be face-balanced for a straight-back/straight-through stroke.

As with its blade brothers, each MacGregor mallets function 10-gram weights on the heel and toe. Within the total scheme of issues, these weights are significantly extra ahead within the putter than backward, which strikes the CG nearer to the face than the again. Putters, notably mallets, attempt to stability CG and MOI. When the CG is again, MOI goes up however, paradoxically, a slight mishit might trigger the ball to start out barely left or proper of the goal, even in case you’re sq. at influence. Shifting the CG nearer to the face can mitigate that, notably on longer putts.

It’s not a know-how that MacGregor is selling or maybe even intending. Nevertheless, the location of the weights signifies a barely ahead CG. It’s not in the identical league as Cleveland’s Frontline sequence however the idea is analogous.

Face Milling

Face milling on putters could be merely aesthetic. However we’re seeing extra putters in all value ranges with extra faces which are, let’s say, purpose-milled. Like Cleveland has completed with its HB SOFT putters since 2018, the brand new MacGregors are face-milled to normalize ball pace on off-center strikes.

This isn’t something new or groundbreaking however it’s efficient. With out face milling, off-center strikes are likely to fall in need of the cup as a result of they miss the candy spot. Face milling, however, has extra groove space and fewer face materials within the heart of the face, and fewer groove space and extra face materials on both facet.

Once you influence the middle of the face, there’s much less materials to influence the ball. However in case you miss only a smidge, there’s extra materials (and fewer groove space) to influence the ball. The realm with extra materials and fewer groove impacts extra drive on the ball, which leads to sufficient ball pace to make up for lacking the candy spot.

Meaning if the stroke is identical, off-center strikes will roll so far as on-center strikes.

Within the putter biz, they name that “distance management.”

The general idea is just like Guerin Rife’s design with Evnroll however is achieved with aggressive rotary milling patterns throughout the face. Cleveland’s SOFT (Pace Optimized Face Know-how) is a extra vertical-looking sample whereas the sample MacGregor makes use of is extra horizontal in look.

MacGregor MT Milled Putters: Closing Ideas

MacGregor continues to carve a pleasant little area of interest for itself in 2024 as a high-value direct-to-consumer model. It’s straightforward for the cynical amongst us to dismiss MacGregor’s merchandise as “open-model” stuff from Chinese language factories. However that mindset qualifies as willful ignorance. Sure, there are merchandise nonetheless accessible from MacGregor which are simply that, open-model stuff from Chinese language factories. Nevertheless, Millington is dedicated to introducing authentic designs. Austie Rollinson, who’s now Senior Director of Putter R&D for Titleist, has designed a number of MacGregor and Zebra golf equipment. The MacGregor MT Milled putters are designed by Larry Tang, who labored with Rollinson at Odyssey and Callaway. His designs embody the legendary Two-Ball putter and varied Callaway irons and drivers.

“We’ve labored with nice designers to make nice merchandise,” says Millington. “You retain placing that collectively and folks will take discover.”

As of late final 12 months, Millington employed former Adams and Hogan designer Gavin Wallin as his in-house designer. He’ll be in command of all new designs for MacGregor, in addition to Millington’s different manufacturers, together with Ram, TearDrop, Zebra and Ben Hogan.

“The stuff we’re doing with him now throughout all our manufacturers goes to be actually fascinating.”

MacGregor’s ends in Most Wished putter testing have been, to be type, center of the highway. We did, nevertheless, see good to excellent efficiency from fashions from Zebra and TearDrop. “We all know we’re going to get examined and it’s going to get reported,” says Millington. “That simply drives us to get higher.”

Specs, Worth and Availability

The MacGregor MT Milled putters are priced to maneuver at $159.99. Every of the 4 fashions could be ordered in 33-, 34- or 35-inch lengths, in left-handed or right-handed. An outsized, MacGregor branded grip is commonplace. MacGregor just isn’t providing loft or lie changes for the MT Milled sequence.